Press fittings stainless steel - type M
Fittings cannot be used on gas (natural / PB)
Stainless Steel DIN 1.4301 (AISI304), Material Wall Thickness 1,5 mm; FKM O-ring
In case of O-ring replacement, use of piping of another dimension or mechanical damage we cannot guarantee the quality of the pressed joint.
Characteristics of Press Fittings:
- easy and quick installation
- for dimensions 15 - 54 mm
- in the assortment of all kinds of fittings, including threaded adapters and reducers
- Thanks to the FKM O-ring used, press fittings can be used up to 200 ° C (FKM O-ring is supplied with each fitting as standard)
- use up to max. pressure 16bar
- standard pressing profile - marked M; For the given profile it is possible to buy together pressing tools for dimensions 15 - 54 mm from our company
Fields of application:
- distribution of drinking, service, and rainwater
- wastewater installations
- heating distribution
- cooling water, glycol cooling circuits
- steam and condensate return pipes
- water distribution systems for extinguishing
- fittings cannot be used on gas (natural / PB)
O-ring FKM Material Characteristic:
FKM (FPM, Viton®, Fluorel®) is often used for its resistance to extreme temperatures and aggressive chemicals. The strong carbon-fluorine bonds that make up the polymer structure have high thermo-chemical resistance and other excellent properties, such as low compression set at elevated temperatures.
FKM offers excellent resistance to mineral oils and fats, aliphatic, aromatic, and some chlorinated hydrocarbons, fuels, silicone oils, and fats. However, FKM exhibits poor resistance to ethers, ketones, esters, and amines.
- Temperature Range: -20 to +200°C, temporarily +300°C
- has significantly lower mechanical properties in hot water and steam (medium mechanical strength, low gas permeability)
- FKM O-ring is resistant to temperatures, ozone, weather, aging, acids, mineral, animal and silicone oils and fats, synthetic hydraulic fluids, HFD pressurized fluids, fuels, aromatic hydrocarbons (benzol, toluene), high vacuum, organic solvents, and other chemicals
- not resistant to polar solvents (acetone, etc.), glycol-based brake fluids, superheated steam, ammonia gas, amine alkali, low molecular weight organic acids (formic, acetic)
Tested and certified in the testing laboratory (you can see the Certificate Attached in categories of goods below)
T Piece, Press Fittings, reduced F/F/F 54_28_54
Properties of a T Piece, Press Fittings Stainless Steel DIN 1.4301 (AISI304) material…
T Piece, Press Fittings F/F(internal thread) /F…
Properties of T Piece, Press Fittings Standard: DIN 32676 Type: CLAMP Material:…
T Piece, Press Fittings, reduced F/F/F 54_35_54
Properties of a T Piece, Press Fittings Stainless Steel DIN 1.4301 (AISI304) material…
Reduction (Reduced Nipple), Press Fittings M/F 54…
Properties of a Reduction (Reduced Nipple) Material Stainless Steel DIN 1.4301 (AISI304)…
T Piece, Press Fittings F/F(internal thread) /F…
Properties of T Piece, Press Fittings Standard: DIN 32676 Type: CLAMP Material:…
T Piece, Press Fittings F/F(internal thread) /F…
Properties of T Piece, Press Fittings Standard: DIN 32676 Type: CLAMP Material:…
T Piece, Press Fittings, reduced, F/F/F 54_42_54
Properties of a T Piece, Press Fittings Stainless Steel DIN 1.4301 (AISI304) material…
Reduction (Reduced Nipple), Press Fittings M/F 54…
Properties of a Reduction (Reduced Nipple) Material Stainless Steel DIN 1.4301 (AISI304)…
Reduction / CLAMP DIN 32676 22 mm_CLAMP collar 50…
reduction, press fitting 22 mm/CLAMP DIN 32676, collar 50.5 mm material: stainless steel…
Reduction / CLAMP DIN 32676 28 mm_CLAMP collar 50…
reduction, press fitting 28 mm/CLAMP DIN 32676, collar 50.5 mm material: stainless steel…
Reduction / CLAMP DIN 32676 35 mm_CLAMP collar 50…
reduction press fitting 35 mm/CLAMP DIN 32676, collar 50.5 mm material: stainless steel…
Reduction / CLAMP DIN 32676 42 mm_CLAMP collar 50…
reduction 42 mm/CLAMP DIN 32676, collar 50.5 mm material: stainless steel DIN 1.4301 …
Reduction / CLAMP DIN 32676 54 mm_CLAMP collar 64…
přechodka lisovací 54 mm/CLAMP DIN 32676, límeček 64 mm materiál: nerezová ocel DIN 1…