The filter body is intended for direct contact with the filtered product. The candle is connected to the filter housing with a lock (designated O-226). Connection of housings to the multi-stage filtration system using a DIN CLAMP connection.

• max. working pressure: 0.6 MPa
• max. working temperature: 100 °C
• surface treatment: Ra <0.4 μm
• number of filter plugs: 1
• maximal sizes of the filter candle: 10" and 30"
• input / output: clamp DIN DN 25
• vent and drain valve with hose adaptor
• connection of the manometer: clamp DIN DN 25
• material: stainless steel AISI 304
• seal: silicone

• food and beverage industry (filtration of wine, beer, liqueurs, apple cider, juice, lemonade)
• chemical industry
• pharmacy, veterinary medicine, biotechnology, medicine, chemical industrial filtration and color filtration.

Candle filtration is based on product filtration on elements (candles, cartridges) in different filtration stages, different constructions, which depend on the type of filtered product, the specification of the industry and the requirements for the output quality of the purified product. Micro­filters (candles) are an integral tool for a perfectly clean product (apple cider, wine or beer) before bottling. With a suitably chosen candle (membrane), you will contribute to the stability of bottled beer, cider, must or wine.

The cleaned product flows through a filter insert (candle), where unwanted impurities and microorganisms, etc. are removed. During this process, the pores of the candle gradually become clogged. If clogging occurs, ie the differential pressure rises to the specified value, it is inadmissible to continue filtering and it is important to replace the spark plug (if we use a disposable one) or regenerate it (if we use a spark plug that can be regenerated). The number of permissible sanitation cycles and their design is specified by the supplier of the filter element with regard to its service life while maintaining the given degree of filtration.

Variant solutions:

  In our offer, it is possible to specify the given filtration and the given number of housings with equipment according to the client's requ­irements, so that it meets everything that the future operator expects from it. Of course, there is the technical support of our technicians, who will be happy to advise you and, if necessary, suggest a suitable set.

Alternative design for 1 × 10 "filter housing:

Items from the Indcom.cz server menu:

1) Filter housing size 10 "– http://www.indcom.cz/…a-housing-10

2) Butterfly valve Clamp (2pieces)– http://www.indcom.cz/…amp-c-c-dn25

3) All-stainless steel manometer with clamp separation membrane, with bottom connection – up to 2.5 bar (1pc)  http://www.indcom.cz/…clamp-50–5mm

4) All-stainless steel manometer with clamp separation membrane, with rear connection – up to 2.5 bar (1pc)  http://www.indcom.cz/…clamp-50–5mm

5) Clamp hose adapter (2pcs) http://www.indcom.cz/…adapter-dn25

6) T-piece clamp (1pc) http://www.indcom.cz/…s-clamp-dn25

7) Heavy-duty clamp DN 25 (7pcs) – http://www.indcom.cz/…i-dn25–32–40

8) Clamp gasket silicone DN 25 (7pcs) – http://www.indcom.cz/…ikonove-dn25


  The price of this configuration ~ 519,– EUR without VAT