Pneumatically-operated Valves, Angle Seat - 45°, G-thread, Gasket PTFE
We supply pneumatic actuators without plastic connection fittings - section Pneumatic components
Basic information
A pilot valve must be purchased to operate the seat valve. A suitable type can be found in the category Pilot Solenoid Valves 3/2
Technical parameters of pneumatically operated valves
| Valve type | single acting, a normally closed |
| Connection | see individual valves (thread G, CLAMP) |
| Hole size | see individual valves |
| Medium pressure | 0 ~ 1.6 Mpa (up to 16 bar) |
| Control air pressure | 0.6 ~ 0.8 Mpa (6–8 bar) |
| Valve body material | see individual valves (SS – stainless steel AISI316, AISI304) |
| Drive material | polyamide |
| Seat seal | PTFE, PPL |
| Coil seal | PTFE, PPL |
| Piston seal | FKM (fluoroelastomer) |
| Medium temperature | –10 ° C ~ + 200 ° C |
| Ambient temperature | –10 ° C ~ + 80 ° C |
| Valve control pressure | see individual valves |
| Designed for | water, liquids, water vapor |
If the valve is used for a long time at limit temperatures, it is necessary to consult the suitability of the valve with the supplier.
SINGLE VALVE FUNCTION PRINCIPLE
This type of valve is widely used in operations requiring repeated start-up in a short time interval, the advantage is its fast and accurate response. The valve is opened with compressed air.
Areas of application
Applications in the dairy, brewing, food, beverage and chemical industries. Filling equipment for beer and other beverages. Textile printing and dyeing. Foaming equipment. For wastewater treatment applications. Suitable for machine tools for refrigerant control. For laundries and dry cleaners (dosing of detergent, water).
