Basic information
| Standard | welded DIN11850-series1, DN32 |
| Type 2 | 2- piece, components connected with CLAMP, silikone gasket |
| Maximal working preassure | 10 bar |
| Material | Stainless steel 1.4301 (AISI 304) |
| Maximal working temperatures | –10 °C/150 °C (according to material of gasket) |
| Gakset disk | silikone |
| Inner surface | Ra≤0.8 µm |
| Outer surface | Ra≤1.6 µm |
| Designed for | liquid, oil, water |
Diameters
- see data sheet
- ID: 32 mm
- OD: 35 mm
Montage
The mounting direction is the same as the medium flow direction. Pressing the medium on the disc opens the flap (see the blue arrow in the flap dimension drawing).
The damper is installed in front of the pump to ensure proper operation of both the pump and the damper.
Check valves are welded to a suitable counterpart. In the case of welding, the valve must first be disassembled to prevent damage to the seal. We recommend checking the tightening of the bolts (CLAMP sleeve) in operation.
Prior to installation, the pipe system must be flushed to prevent damage to the valve by mechanical impurities.
Before maintaining or dismantling the valve, make sure that the temperature and pressure of the medium flowing through the pipe have already dropped (medium temperature above 50 ° C and below 0 ° C can cause serious injuries). Hazardous fluids must be drained before maintenance.
Most common areas of check valves applications
Wineries, breweries, dairy industry, beverage industry, food processing, pharmaceuticals etc.
Compatible accessories
Stainless Steel Welded Union According to the…
Properties: Stainless Steel Sanitary Union Consists of a Nut, Liner, Male, and Silicon…
Similar products
Stainless Steel Check Valve, CLAMP C-C DN32
Diameters: see data sheet ID: 31 mm Properities: Standard: DIN Max. working pressure:…
