• Material: stainless steel DIN 1.4408 (CF8M-standard ASTM A352)
• Connection: inner thread BSP-G ½,“¾“
• Maximal working pressure: 13 bar (200PSI)
• Maximal working temperature: –10 °C/160 °C
• Designed for: liquid, water, oil
• Without gasket

• The direction of mounting is determined by the arrow on the flap body, its direction is the same as the direction of the medium flow.
• The damper is installed in front of the pump to ensure the proper operation of both the pump and damper.
• The non-return valves are screwed into a suitable counterpart. It is recommended to preserve the fittings with Loctite 8105 grease during installation. When threading other system components with fittings, ensure that they are held with a spanner. This will prevent the fittings from being damaged by twisting.
• The pipe system must be flushed prior to installation to prevent damage to the valve by mechanical impurities.
• Before maintaining or removing the fitting, make sure that the temperature and pressure of the flowing medium have already fallen (medium temperature above 50 ° C and below 0 ° C can cause serious injuries). Dangerous fluids must be drained before maintenance.
• The valves do not require special maintenance.

Wineries, breweries, dairy industry, beverage industry, food processing, pharmaceutical­s, etc.

• Celonerezová zpětná klapka plovoucí závitová.pdf