Stainless steel ball valve with full bore, two-piece, threaded
Ball valves are shut-off valves. From a structural viewpoint they are not suitable as a control valve. The valve must be fully opened or closed.
Basic information
Ball valves are shut-off valves. From a structural viewpoint, they are not suitable as a control valve. The valve must be fully opened or closed.
For applications requiring fine control of flow rate or pressure, other types of valves, such as globe valves, needle valves, or control valves, are more suitable. These valves are specifically designed to provide more precise flow regulation and can handle throttling better without causing excessive wear.
Properties
| Control | manually - using a lever |
| Connections | BSP thread Female G 1/2 ", 3/4", 1 ", 1 1/4", 1 1/2 ", 2", 2 1/2 ", 3" |
| Pressure range | Up to 69 bar (1000PSI) |
| Working temperature | -20°C/160°C |
| Material | DIN 1.4301 (AISI 304) seat PTFE, stem seal PTFE (detailed material composition - attached document) |
| Designed for | liquid, water, oil |
Ball valve installation
To connect by screwing into a suitable counterpart. We recommend mounting undertake preservation food grease fittings Loctite 8105th
Most common areas of ball valves applications
Wineries, breweries, the food and beverage industry, the dairy industry, refrigeration, water management applications, the chemical industry, etc.
